Hi! Simply click below and type your query.
Our experts will reply you very soon.
Elstein FSF panel radiators are ceramic infrared radia- tors with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 °C and surface ratings up to 64 kW/m².
Compared to other Elstein panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.
FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.
Esltein FSF radiators are available in four designs and cover the power range from 60 W to 1000 W. They have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change
The power can be controlled using thermocouple radiators together with TRD 1 temperature controllers, TSE thyristor switching units and other accessories.
IR radiation areas can be assembled using MBO mounting sheets.
The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.
Our instructions for mounting, operation and safety must be observed.
|Type, weight, wattage||FSF/1, FSF
|Typical operating temperature||400||500||590||670||720||°C|
|Maximum permissible temperature||750||750||750||750||750||°C|
|Standard design||Thermocouple radiators||Variants|
|Operating voltage 230 V Ceramic full-pour casting White glaze
Leads 85 mm
Elstein standard socket Mounting set
|Designation T-FSF, T-FSF/1, T-FSF/2, T-FSF/4
Integrated thermocouple Type K (NiCr-Ni)
TC leads 100 mm
|Special wattages Special voltages Extended leads
Leads with ring terminals